Dataram 16Gb Ddr3 Sdram Memory Module Dtm64385F

Description :

Dataram 16GB DDR3 SDRAM Memory Module
DTM64385F is a registered 2Gx72 memory module, which conforms to JEDEC's DDR3, PC3-12800 standard. The assembly is Dual-Rank, with each rank containing eighteen Samsung 1Gx4 DDR3-1600 SDRAMs.

One 2K-bit EEPROM is used for Serial Presence Detect and a combination register/PLL, with Address and Command Parity, is also used.

Both output driver strength and input termination impedance are programmable to maintain signal integrity on the I/O signals in a Fly-by topology. A thermal sensor accurately monitors the DIMM module and can prevent exceeding the maximum operating temperature of 95C.

• 240-pin JEDEC-compliant DIMM, 133.35 mm wide by 30 mm high


• Operating Voltage: 1.5V ±0.075


• I/O Type: SSTL_15


• On-board I2C temperature sensor with integrated Serial Presence Detect (SPD) EEPROM


• Data Transfer Rate: 12.8 Gigabytes/sec


• Data Bursts: 8 and burst chop 4 mode


• ZQ Calibration for Output Driver and On-Die Termination (ODT)


• Programmable ODT / Dynamic ODT during Writes


• Programmable CAS Latency: 6, 7, 8, 9, 10, and 11


• Bi-directional Differential Data Strobe signals

Product Type: RAM Module
Environmentally Friendly: Yes
Environmental Certification: RoHS
Brand Name: Dataram
Form Factor: DIMM
Length: 5.3"
Manufacturer: Dataram Corporation
Product Name: 16GB DDR3 SDRAM Memory Module
Manufacturer Part Number: DTM64385F
Manufacturer Website Address: http://www.dataram.com
Number Of Pins: 240-pin
Thickness: 155.1 mil