Tripp Lite U330-10M Usb 3.0 Superspeed Active Extension Repeater Cable (A M/F), 10M (32.8 Ft.)

Description :

USB 3.0 SuperSpeed Active Extension Repeater Cable (A M/F), 10M (32.8 ft.)

Tripp Lite U330-10M USB 3.0 SuperSpeed Active Extension Repeater Cable (A M/F), 10M (32.8 ft.). Cable length: 10 m, Connector 1: USB A, Connector 2: USB A, USB version: USB 3.2 Gen 1 (3.1 Gen 1), Connector gender: Male/Female, Maximum data transfer rate: 5000 Mbit/s, Product colour: Black

Tripp Lite's 32.8-ft. (10 m) USB 3.0 active extension cable is a bus powered extension cable that can be used to increase the length of a device cable without the worry of signal loss and potential performance problems. Increase the extension distance to 65.61-ft. (20 m) by connecting two U330-10M together. USB limits a cable's length to 16-ft. (4.88 m). Any length above 16-ft. (4.88 m) requires the use of an active cable such as this one. This cable has a signal booster built in. The cable must be plugged directly into a USB port (either on the PC or a hub). Use a standard 6-ft. (1.83 m), 10-ft. (3.05 m), or 15-ft. (4.57 m) USB 3.0 A-B cable to reach the desired distance. The U330-10M provides up to 120mA of power to the connected device. If your device requires more than 120mA of power, an external power supply will be required. The U330-10M accepts a 5V, 2A power supply with a 3.5 x 1.35mm DC jack. The output plug on the power supply should have a positive tip and a negative sleeve.

Extend a USB 3.0 signal 32.8-ft. (10 m)
Increase the extension distance to 65.61-ft. (20 m) by connecting two U330-10M together
Works together with standard USB 3.0 cables
Provides up to 120mA of power to the connected device. If your device requires more than 120mA of power, an external power supply will be required.
Accepts a 5V, 2A power supply with a 3.5 x 1.35mm DC jack. The output plug on the power supply should have a positive tip and a negative sleeve.
Backward compatible to previous USB generations