Transition Networks Tn-Sfp-Lx1 Network Transceiver Module Fiber Optic 1000 Mbit/S 1310 Nm

Description :

1000BASE-LX 1310nm single mode (LC), 10km

Transition Networks TN-SFP-LX1. SFP transceiver type: Fiber optic, Maximum data transfer rate: 1000 Mbit/s, Interface type: SFP. Certification: IEC-60825, FDA 21, CFR 1040.10, 1040.11. Power consumption (typical): 0.66 W. Width: 13 mm, Depth: 55 mm, Height: 8 mm

The TN-SFP-XXX Small Form Factor Pluggable (SFP) transceivers are designed for bi-directional serial optical data communications such as Gigabit Ethernet or Fiber Channel and speeds up to 2.5Gbps.

The device is designed for use in Switches and routers compatible with Small Form Factor Pluggable Multi-Sourcing Agreement (MSA).

ALL modules also offer comprehensive digital diagnostic capability (DMI)[unless otherwise noted].

Note: Per Cisco Systems’ literature, the Cisco switches with SFP slots do not accept modules other than Cisco's own SFPs. The Cisco switch identifies the manufacturer ID along with the part number and blocks operations to this port for non-Cisco interfaces. Other major SFP switch manufacturers do not indicate in their literature that such restrictions are imposed.
Transition Networks' SFP units fully comply with Multi-Sourcing Agreement (MSA). This compliance allows Transition Networks SFP modules to be used on other MSA-compliant SFP platforms without any problems.