Altronix Ip And Poe+ Over Extended Distance Utp Or Cat5E Pace1Ptm

Description :

Altronix IP and PoE+ Over Extended Distance UTP or CAT5e
The Pace1PTM is a long range Ethernet transceiver designed for use with Pace1PRM, Pace4PRM, Pace8PRM and Pace16PRM receivers. They transmit data at 100mbps full duplex and power via a single twisted pair (UTP) (when paired with Pace1PRM) or Cat5e or higher cable in a PoE(+) compliant format. The Pace1PTM will not deliver power to non compliant devices, thus avoiding damage to improperly connected non-PoE cameras/devices. The receiver passes the PoE(+) compliant power over the cable to the Pace1PTM transceiver which in turn passes this power to an enabled IP camera/device. These plug and play units facilitate cost effective solutions for IP devices that need to be installed at distances greater than 100m. They also provide a simple way to replace legacy analog products with new IP devices over single twisted pair (UTP) (when paired with Pace1PRM) or structured cable. Applications:

• Retrofit digital IP cameras in an analog CCTV CAT5 or UTP installations.
• Extend Network link distance in an industrial environment.
• Works with Megapixel, HD720, HD1080 and VGA (SD) cameras. With proper head end equipment.

• UL/cUL Listed. CE Approved.


• Supports PoE (IEEE 802.3af) or PoE+ (IEEE 802.3at).


• 100Mbps full duplex.


• Works with Pace1PRM, Pace4PRM, Pace8PRM and Pace16PRM. Transmits IP video/data over CAT5 up to 500m or up to 152m over UTP.


• Ethernet over Extended Distance CAT5e or UTP Transceiver.

Product Type: Network Extender
Environmentally Friendly: Yes
Environmental Certification: RoHS
Transmitter Weight (Approximate): 4 oz
Country Of Origin: United States
Brand Name: Altronix
Manufacturer: Altronix Corporation
Product Name: IP and PoE+ Over Extended Distance UTP or CAT5e
Manufacturer Part Number: PACE1PTM
Manufacturer Website Address: http://www.altronix.com
Limited Warranty: Lifetime
Additional Information: Input:

• PoE (15W) IEEE 802.3af compliant or PoE+ (30W)
• IEEE 802.3at compliant from Pace1PRM, Pace4PRM, Pace8PRM, or Pace16PRM.

• Connectivity: RJ45, auto-crossover.
• Wire type: 4-pair CAT5e or a single twisted pair UTP.
• Speed: 10/100BaseT, half/full duplex, auto negotiation.
• PoE compliant to IEEE 802.3af (15W) and PoE+ compliant to IEEE 802.3at (30W) delivered to camera by Pace1PTM.
• Throughput is rated to pass 100mbps of data.

• Distance: up to 152m @ 100mbps.

• Distance: up to 500m @ 100mbps.

• Green - PoE ON (by respective RJ45 jack).
• Yellow and Green LED IP Link status, 10/100Base-T/active.

• Operating Temperature:
• For 15W: -40° C to 75° C (-40° F to 167° F).
• For 25W: -40° C to 70° C (-40° F to 158° F).
• For 30W: -40° C to 60° C (-40° F to 140° F).
• Storage Temperature:
• -40° F to 167° F (-40° C to 75° C).
• Relative humidity: 20 to 85%, non-condensing.
• Operating Altitude: - 1000 to 6,561.679 ft.
• (- 304.8 to 2000m).

• Auto detection and protection of legacy non-PoE cameras/devices.